"TOP" drain is one of the
best means of connecting to an outlet drain. Its dimensions
conform to UNI EN 1451-1, and it fits to bell and spigot
jointed pipes without using adhesive.
"TOP" drain is particulary suited for use
in low pitch roofs, under roof gardens, inverted roof
systems and titled roof areas.
Fixing and fastening to the waterproofing material is
by a threaded ring which allows applicator to use it
with all types of waterproofing membranes.
Tecnical characteristics and accessories:
- Circular flage Ø
333 mm. with fastening holes;
- Seal ring;
- 165 mm countersuck top
and stem Ø 75-110-125-160 mm for a total
height of 250 mm.;
- Protective cover with
a central pin as a handy cutting guide;
- Metal handy cutting
guide with slit for blade;
- Threaded ring with 3
locationg holes for leaf or gravel guard positiong
and tightening lugs;
Optionals
- Adaptor piece for fitting
foot traffic resistant grille;
- 188x188 foot traffic
resistant grille;
- L seal piece for positioning
pipes or outlets;
- 220 V 14 W heater element;
- High density polyurethane
insulation;
- Pipe bell joint and
seal Ø 75-110-125-160 mm, 500 high;
Drainage capacity of "Top" drain
- Diam. 75 = 300 lt./min.
- Diam. 110 = 492 lt./min.
- Diam. 125 = 690 lt./min.
- Diam. 160 = 786 lt./min.
- With gravel/grate -20%
- "TOP" drain
is re-cycleable
INSTALLATION
MANUAL
